NEC SV8500, Руководство пользователя

Страница: 1069 / 3438

VOL.2-816
MG(BRI) [SCA-2BRIA/MG-2BRIA]
MBTK (Make Busy of Trunk)
Cancel the Make-Busy of Virtual Speech Path.
RT: Route Number
TK: Trunk Number
MB: 0=Make-Busy Cancel
AMGIL (Assignment of Media Gateway Information for LDM)
Note:
Make sure to assign in order of ATRK → AMGIL.
Assign MG(BRI).
MG-ID: MAC Address of MG(BRI) (6 byte of HEX data)
* MAC address is labeled on the left front of MG(BRI) (below PWR lamp).
FUNCTION:Setting (to assign MG information)
KIND:
ISDN Trunk (BRI)[SIP]
LINE: 0/1 (MG Line Number)
CH: 0/1 (Channel B1/Channel B2)
LENS: Accommodating Location of Virtual Speech Channel
*
Make sure that LENS number assigned here already has been assigned by the ATRK.
SETTING OF SERVICE TYPE EXISTS (Signaling Packet):
Place the check box ON to assign ToS data for signaling control of MG(BRI).
IP Precedence [0-7]/Diffserv [00-63]
MUSIC ON HOLD EXISTS:Place the check box ON to select hold-tone type.
External Music-on-Hold
Select Input gain adjustment.
0=0dB (default)
1=-10dB (gain)
2=-15dB (gain)
3=-20dB (gain)
Internal Music-on-Hold 1
Internal Music-on-Hold 2
Note:
The gain value decreases when the PAD is assigned at - (minus) value, to turn up the level of external mu-
sic-on-hold.
EMERGENCY TELEPHONE: Automatic cancel/Manual cancel
FUNCTION:RESET
ACTION AFTER RESET: Startup with operation mode/Startup with emergency telephone mode
Note:
Both channels CH0 and CH1 need to be assigned together. Do not assign individually. (Same condition is
applied when deleting the data)
AMGVL (Assignment of Media Gateway Voice Control Data for LDM)
Assign the Voice control data to connect to MG(BRI).
*AIVCL command setting turns effective if AMGVL is not assigned.
A RT (Storing MG):Route number of virtual speech channel used for MG(BRI).