NEC SV8500, Руководство пользователя

Страница: 1921 / 3438

VOL.2-1668
MG-SIP96
• If you have set a character string to specify the service provider, the character string is used as the SIP do-
main name.
• Be sure not to enter a blank character to the end of the FQDN (with the Copy and Paste features of your
personal computer), and be careful not to mistype a character. (“0”(zero) or “O” (alphabetical O), for ex-
ample.)
Note 8:
The rport(RFC3581) function is available for SP-3987 MGSIP PROG-B Issue 3 or later. The fol-
lowing conditions are applied to this function.
• Even though the setting of rport(RFC3581) is disabled, the rport parameter can be received.
• INVITE message defined in RFC3581 cannot be retransmitted.
(54) sip_tel_service
Setting of additional services
The command is used to enable/disable the use of additional service features (Hold/Retrieve/Transfer
from the SIP network side terminal)
[Setting Example].
When enable (=1) is selected, the following screen is displayed. (When disable is selected, no screen is dis-
played.)
MG(SIP)>set sip_tel_service
Select SIP telephony service function.
0=disable(default)
1=enable
Input:1
0: additional service feature is disabled
(Default)
1: additional service feature is enabled
Select Replaces function.
0=enable(default)
1=disable
Input:0
Enable/disable Replaces function.
0: enable (Default)
1: disable
Select Hold [a=inactive] function.
0=enable(default)
1=disable
Input:0
0: a=inactive hold function is enabled
(Default)
1: a=inactive hold function is disabled
Select Hold [put off hold] function.
0=disable(default)
1=enable
Input:1
Enable/disable hold (put off hold) function.
0: disable (Default)
1: enable
Select REFER/NOTIFY function.
0=enable
1=disable(default)
Input:0
Enable/disable REFER/NOTIFY function.
0: enable
1: disable (Default)
Note 9