NEC SV8500, Руководство пользователя

Страница: 2965 / 3438

VOL.3-478
CHAPTER 4 CONFIGURATION SETUP
A
STEP 5: Enter the file name to be downloaded by pressing "numeric keys", " " or "#" on the terminal.
STEP
6: After entering the file name, press TFTP key (the leftmost soft key) for TFTP, or FTP key (the rightmost soft key) for FTP.
Keys
Enterable Alphanumeric Characters
1
2
→ A → B → C → a → b → c → (back to 2)
3 → D → E → F → d → e → f → (back to 3)
4 → G → H → I → g → h → i → (back to 4)
5 → J → K → L → j → k → l → (back to 5)
6 → M → N → O → m → n → o → (back to 6)
7 → P → Q → R → S → p → q → r → s → (back to 7)
9 → W → X → Y → Z → w → x → y → z → (back to 9)
8
→
T
→
U
→
V
→
t
→
u
→
v
→
(back to 8)
→
#
→
.
→
-
→
_
→
(back to )
0
1
2
3
4
5
6
7
8
9
0
# Moves the cursor one space to the right.
Enterable Alphanumeric Characters List
File: ramhPtoP. hex
TFTP Cancel FTP
Downloading...
Downloading...
Download Complete
Exit
Downloading...
Download Complete
Exit
STEP
7: After a while, the display will change as follows indicating the download is completed.
STEP
8: Press Exit key to reset the IP Enabled Dterm. The terminal starts up again with the new program.
While download is in progress, "Downloading..." is displayed.
Caution:
Do Not Turn OFF the power of the IP Enabled Dterm while "Downloading..." is displayed. If the
power is turned OFF, there is a possibility that the IP Enabled Dterm cannot start up normally.
B
"Download Complete" is displayed when the download is complete.
At this time, configuration data saved at the previous step is retained even if the terminal is
reset. Data reassignment is not required.
Note
Note:
In this example, press FTP key for FTP.