NEC SV8500, Руководство пользователя

Страница: 347 / 3438

VOL.2-94
Analog 2MC (Analog Media Converter)
23. Setting Synchronous Ringing:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
24. Setting Balancing Network (BNW) to each channel:
Note:
The BNW setting value is determined by the country and the kind of BNW for each channel as shown in the
following table. (For the COUNTRYCODE, refer to the set command
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
COUNTRY
BNW SET-
TING VALUE
KIND OF BNW
North America/
countries applying µ-law interface
0 600
Ω
1 350+(1K//0.21
µ
)
Australia
0 600
Ω
1 220+(820//120n)
China
0 220+(560//100n)
1 220+(560//100n)
Brazil
0 800//50n
1 900
Ω
countries applying A-law interface
0 600
Ω
1 350+(1K//0.21
µ
)
Line 1: Enter ON or OFF, whether the ringer of both
channels ring simultaneously or not
ON=Ringer timing synchronizes
OFF=Ringer timing does not synchronize (de-
fault)
Line 2: Result is shown
2A-MC>SET SYNCRINGING OFF
Synchronous Ringing setting succeeded.
2A-MC>_
Line 1: Enter the BNW value in the range 0-1 (de-
fault=0) after the parameters VALUE,
CHANNEL, and BNW00/BNW01
BNW00: to channel 0
BNW01: to channel 1
2A-MC>SET VALUE CHANNEL BNW00 1