NEC SV8500, Руководство пользователя

Страница: 1913 / 3438

VOL.2-1660
MG-SIP96
When Session-Timer is Disable (=1) is selected:
Note:
Assign this command adjusting to the specifications on the SIP network where MG-SIP96 connects.
(46) signaling_port_no
Setting of the UDP port number that receives control signal packets
This command is used to specify the UDP port number that receives the control signal packets.
[Setting Example]
Select the setting of Session-timer.
0=enable(default)
1=disable
Input:0
Input Session-expires timer value.(sec)
(0-86400(default=180)):180 Set the session timer.
(Default: 180sec)
Select Refresher type.
0=UAC(default)
1=UAS
Input:0
Determine a point to make refresher.
UAC: User Agent Client
UAS: User Agent Server
Select "refresher=uac" ini-INVITE.
0=disable(default)
1=enable
Input:0
refresher=uac addition to INVITE mes-
sage:
0: refresher=uac is not added
1: refresher=uac is added
Select Forced mode.
0=disable(default)
1=enable
Input:0
0: Session timer will not be activated
when Supported/Require header does
not exist (default).
1: Session timer will be activated by
using Session-Expires when Sup-
ported/Require header does not exit.
MG(SIP)> set session_timer
Select the setting of Session-timer.
0=enable(default)
1=disable
Input:1
MG(SIP)> set signaling_port_no
Input Signaling Port Number.
(1024-65535(default=61012)):61012
Assign the UDP port number that receives the con-
trol signal packets (Default: 61012).