NEC SV8500, Руководство пользователя

Страница: 1461 / 3438

VOL.2-1208
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
15.4.6 SETUP Command
1. SETUP
Δ
SP
This command is used to set up network environment of MG(PRI) SIP Mode.
MG-PRI(SIP)>SETUP SP
---DHCP Interface set---
Current DHCP Interface:ENABLE
The current setting is displayed.
Change DHCP Interface? [Y (change)/N (current)/Q
(quit)]: Y 1) Select the DHCP setting.
Y: Change the setting
N: Remain the current setting
Q: Exit the command
Input new DHCP Interface [E (enable)/D (disable)]:D 2) Enable/Disable the DHCP Server.
E: Enable a new DHCP Server (default)
D: Disable DHCP Server
--- DNS Interface set ---
Current DNS Interface: DISABLE
The current setting is displayed.
Change DNS Interface? [Y (change)/N (current)/
Q(quit)]: Y 3) Select the DNS setting.
Y: Change the setting
N: Remain the current setting
Q: Exit the command
--- DNS IP Address set ---
Current DNS IP Address: 0.0.0.0
The current setting is displayed.
Change DNS IP Address ? [Y(change)/N(current)/
Q(quit)]:y
Input new DNS IP Address: 10.40.1.150 3) Select the DNS setting.
Y: Change the DNS IP Address.
N: Remain the DNS IP Address.
Q: Exit the command
--- IP Address & Subnetmask set ---
Current IP Address: 0.0.0.0
The current setting is displayed.
Current Subnetmask: 255.255.255.255
Change IP Address and Subnetmask? [Y (change)/N (cur-
rent)/Q(quit)]: Y
6) Select the network setting of
MG(PRI).
Y: Change the setting
N: Remain the current setting
Q: Exit the command
Input new IP Address: 10.41.1.100
7) Specify a new IP address.
Input new Subnet mask: 255.255.255.0
8) Specify a new subnet mask.
--- Host Name set ---
Current Host Name: No Value
The current setting is displayed.
Change Host Name? [Y (change)/N (current)/Q(quit)]: Y
9) Select the host name setting of
MG(PRI).
Y: Change the setting
N: Remain the current setting
Q: Exit the command