NEC SV8500, Руководство пользователя

Страница: 496 / 3438

VOL.2-243
MC & MG with PFT
03 = 6dB
AUNT: Assignment of Unit Data
MG: Module Group Number
TYPE: 1 (Select 1 for Unit data assignment)
UNIT0: 1/2 (Unit 0 is used/not used).
UNIT1: 1/2 (Unit 1 is used/not used).
UNIT2: 1/2 (Unit 2 is used/not used).
UNIT3: 1/2 (Unit 3 is used/not used).
ANPD: Assignment of Numbering Plan
1st DC: Assign the 1st DC of the station numbers.
NND: Assign the total station number digits.
ASPA: Assignment of Special Access Code
ACC: Assign the access code using the 1st DC specified by the ANPD command.
ATNR: Assignment of Tenant Restriction Class Data
Assign the Connection Restriction Data between Originating Tenant (OGTN) and Terminating Tenant
(TMTN). When ASYD, SYS1, INDEX 94, b0=0 is assigned (Multiple Tenant Service is in-service), assign
the respective Tenant Number of OGTN and TMTN. If not (when the data is “1”), assign the fixed Tenant
Number of “1” for both OGTN and TMTN.
TRI: “0” for Station-to-Station Calling
OGTN: Number of Originating Tenant
TMTN: Number of Terminating Tenant
RES:
“0” for restriction/”1” for permission
Note:
For a Station-to-Outgoing Trunk Connection, allow the Route Restriction for each trunk by the ARSC com-
mand.
AISTL: Assignment of IP Station Data (LDM)
Assign the IP Station Data of each terminal connected to the MC by the AISTL command.
TN: Tenant Number [1-63]
IP STN: Station Number of IP Station (assign the station number for each analog terminal connected to
the MC&MG)
KIND: Kind of IP Terminal. Select the terminal kind MC-MG (COT) from the combo box
TEC: Telephone Equipment Class [1-31]
RSC: Route Restriction Class [0-15]
SFC: Service Feature Restriction Class [0-15]
LENS: IP Station Equipment Number as Virtual LENS. Allocate the IP station to the Virtual LENS
within Virtual PIR, or to the LENS of a vacant slot that the Station/Trunk is not mounted (an IP
station cannot be assigned to a registered station multiple times.)