NEC SV8500, Руководство пользователя

Страница: 1114 / 3438

VOL.2-861
MG(BRI) [SCA-2BRIA/MG-2BRIA]
SHOW: Command to display the configuration data
22 VLAN Assign the Tag VLAN information.
23 WARNING_TONE_CONTROL Assign whether to use warning tone when LAN failure or not.
Sub-command Function
1 CALL_HOLD Display the current setting of MG Based Call Retention.
2 CONFIG Displays the list of current configuration data.
3 DEFAULT_GATEWAY Displays the current setting of Default Gateway.
4 DHCP_SV Displays the current setting of DHCP server.
5 DNS_IPADDRESS Displays the current IP address setting of DNS server.
6 DNS_SV Displays the current setting of DNS server.
7 DTMF_IN Display the current setting of DTMF relay of in-band signaling.
8 FAX_DETECTION_TIME Displays the current setting of effective timer for FAX switching.
9 HC_RCV_TIMER
Displays the current setting of Time-out timer for SIP server health
check packet waiting process.
10 INTERFACE
Displays the current setting for speed and activation mode of Ether-
net controller.
11 LAN_ERROR_CHECK Displays the interval to detect LAN cable fall-off.
12 ONE_TIME_PASS Displays the current setting of one time password.
13 OWN_IPADDRESS
Displays the current setting of IP Address, Subnet Mask, and Host
Name of MG(BRI) itself.
14 RTP_START_PORT_NO Displays the current setting of RTP Start Port Number.
15 RTP_STOP_DETECT Displays the current setting of RTP Stop Detect Timer.
16 SIGNALING_PORT_NO Displays the current setting of Signaling Port number
17 SIGNALING_QOS Displays the current setting of QoS data for signaling session.
18 SIP_MADDR Displays the current setting of SIP maddr.
19 SIP_RPORT Displays the current setting of SIP rport.
20 SIPSV_IPADDRESS
Displays the current setting of SIP server’s IP address, port number,
and host name.
21 SMOOTH_PAD Displays the current Smooth PAD mode.
22 SUBSCRIBE_RETRY
Displays the current setting of regeneration mode for SIP SUB-
SCRIBE session.
23 VLAN Displays the current VLAN setting.
Sub-command Function