NEC SV8500, Руководство пользователя

Страница: 360 / 3438

VOL.2-107
Analog 2MC (Analog Media Converter)
Note:
The screen returns to the prompt of the maintenance command (2A-MC, in default) if any error occurs when
“Y” is selected after changing the configuration data.
4.5 Error Messages
When an error occurs using the maintenance commands, an error message is generated. This message will help
find solutions for re-assignment of the required data.
List of Error Messages
ERROR MESSAGE CAUSE
Command not found.
Command not found (a command other than the supported command is
entered).
Entered parameter is illegal.
The entered parameter is illegal (a parameter other than expected is en-
tered).
It has made a mistake in the address
form.
The form of the entered address is different.
Out of memory range.
Out of memory range.
Parameter is over digit.
The specified memory address exceeds the number of digit.
Please enter sub command.
Required sub command has not been entered.
Range is illegal.
The specified range is illegal.
Sub command not found.
The entered sub command is not correct.
The inputted command cannot be distin-
guished.
The system cannot recognize the entered command.
The inputted key name is not used.
The entered key name is not correct.
The inputted section name is not used.
The entered section name is not correct.
This character is not support.
The entered command includes an unsupported character.
Line 1:
Line 2: Normal occasion
Line 1:
Line 2:
Line 3:
Line 4:
Line 5:
Line 6: Select Y to make the changed configura-
tion data effective and exit the mainte-
nance command
Line 7: Result is shown
2A-MC>EXIT
Configuration data is changed. Does it save and end?
Y: It saves and ends.
N: It ends without saving.
C: Cancel
[Y/N/C]: Y
Configuration data has been changed!!
2A-MC>EXIT
In normal occasion:
When SAVE command has not bee executed after data change: