NEC SV8500, Руководство пользователя

Страница: 2970 / 3438

VOL.3-483
CHAPTER 4 CONFIGURATION SETUP
Error Messages of IP Enabled Dterm (2/4)
ERROR MESSAGES MEANING ACTION
IP Enabled Dterm double assignment
“Double Assignment” was received
from DRS, after sending “initial setup
request” from the IP Enabled Dterm.
(From this indication, configuration
display can be shown by the ordinary
configuration data assignment opera-
tion.) • Change the data assigned at the
System.
Illegal Line Equipment Number
“Illegal LEN” was received from the
DRS, after sending “initial setup re-
quest” from the IP Enabled Dterm.
(From this indication, configuration
display can be shown by the ordinary
configuration data assignment opera-
tion.) • Change the LENS of the
IP Enabled Dterm at the System.
PH cannot hunted
IP Enabled Dterm cannot hunted the
proper PH, after sending “initial setup
request” from the IP Enabled Dterm.
(From this indication, configuration
display can be shown by the ordinary
configuration data assignment opera-
tion.) • Investigate the reason why the
PH cannot be used.
• Ask System maintenance per-
sonnel for the reason why PH
cannot be used.
Registration Module Cannot Recognize
Equipment Type
Registration Module cannot recognize
the equipment type message received
from the IP Enabled Dterm.
(From this indication, configuration
display can be shown by the ordinary
configuration data assignment
operation.)
• Reset the Telephony Server.
Configuration data duplicate in Port Num-
ber is downloaded or registered. IP Enabled Dterm doesn't work be-
cause duplicate port numbers are as-
signed to the DRS Self Port, Protims
Self Port, RTP Self Port and Voice
Control Port. • Assign a unique port number to the
DRS Self Port, Protims Self Port, RT
Self Port and Voice Control Port
again, referring to “5. Charging Port
Number”.
Double Assignment
Exit
Illegal LEN
Exit
PH Unavailable
Exit
Illegal Equipment Type
Exit
Port Number Duplicate