NEC SV8500, Руководство пользователя

Страница: 1885 / 3438

VOL.2-1632
MG-SIP96
Note:
The conditions of this command are as follows.
• This command is available for SP-3987 MGSIP PROG-B Issue 3 or later.
• In the Telephony Server side, a system data setting (ASYDL, System Data 1, Index 1144, Bit 6=1 (Codec
Change function is in service) is required to enable this function.
• In the Telephony Server side, payload type and payload size need to be assigned by AIVCL/AIVCN, AMGVL/
AMGVN, and ARTI/ARTIN commands.
• Also specify G.711 (fixed) as FXPT (Payload Type for IP FAX) and specify the payload size equal to that of
voice data as FXPS (Payload Size for IP FAX). Then assign the FXPT and FXPS data to AIVCL/AIVCN and
AMGVL/AMGVN commands.
• Payload size cannot be converted in MG-SIP96. When an RTP packet whose payload size is 20 ms is re-
ceived from the Telephony Server network, the packet is transferred to the SIP network without converting
the payload size. Same behavior applies to the RTP packet received from the SIP network.
• To use the following methods, enable commands shown below.
- [ReINVITE] method: enable “set sip_tel_service” command
- [UPDATE] method: enable “set sip_tel_service” and “set update” commands
(13) cpn_pattern
Setting of a way of obtaining information for cpn (calling party number)
This command is used to assign how to obtain cpn (calling party number), and to change the priority of
obtaining calling party number when a call terminates via SIP network.
When this command is enabled, calling party number is obtained according to the priority order shown
in the table below:
• The following shows the method of obtaining cpn when this feature is available.
Select the setting of Codec Change
function.
0=disable (default)
1=enable
Input: 1
Enable/disable the Codec Change function.
0 = Disable (default)
1 = Enable
Select the setting of G711 Fax
renegotiation.
0=disable (default)
1=enable
Input: 1
Enable/disable the G711 Fax renegotiation.
0 = Disable (default)
1 = Enable
Selected Parameter
Order of priority
1 2 3
0 Displayname Displayname Userinfo -
1 Userinfo Userinfo Displayname -
2 Anonymous
Userinfo (Anony-
mous)
Userinfo Displayname