NEC SV8500, Руководство пользователя

Страница: 3154 / 3438

VOL.3-667
CHAPTER 4 CONFIGURATION SETUP
[1] Configuration Setting on Terminal
A
[Network Settings]
4.Subnet Mask
5.DNS Address
6.Advanced Settings
Exit
STEP 2: The LCD displays [Network Settings] menu. Select “6. Advanced Settings.”
STEP 3: On [Advanced Settings] menu, select “4. Type of Service.”
[Advanced Settings]
4.Type of Service
2.PC Port Settings
3.CDP Mode
Exit
STEP 1: On [Config] menu, select “1. Network Settings.”
[Config]
1.Network Settings
2.SIP Settings
3.Maintenance Settings
Cancel Save
1. DHCP Mode
2. IP Address
3. Default Gateway
4. Subnet Mask
5. DNS Address
6. Advanced Settings
Network Settings Menu List
Up
Down
1. Press the number button “0” once.
2. Press the number button “2” three times
(The value changes “2” > “A” > “B.”)
STEP 4: The LCD displays [Type of Service] setting screen.
Select the packet type for setting ToS.
1. RTP
2. SIP
[Type of Service]
1.RTP
2.SIP
Cancel OK
STEP 5: ToS value setting screen for the selected packet type (RTP in this example) is displayed.
Enter any Hex value using the number key and then press “OK”.
Example: When entering “0B (Hex)”
Press the software key for “BK” to delete the entered value.
[RTP]
ToS(Hex)
A0
BK Cancel OK
Note:
For other operations, " ↑ " and " ↓ " of software key,
cursor key, and touch-sensitive panel operation are
also available. Refer to Section 6.1.1.2 Operations for
more details.