NEC SV8500, Руководство пользователя

Страница: 1883 / 3438

VOL.2-1630
MG-SIP96
[Setting Example]
Note: The conditions of this command are as follows.
• Assign this command adjusting to the specifications on the SIP network where MG-SIP96 connects.
• Parameter “4=P-Called-Party-ID[isub]” is available since SP-3987 MGSIP PROG-B Issue 2 or later. For
the other parameters, there is no difference among firmware versions.
(b) If the firmware version is earlier than SP-3987 MGSIP PROG-B Issue 2.
4
P-Called-Par-
ty-ID (isub)
P-Called-
Party-ID
(isub)
P-Called-
Party-ID
(userinfo)
To (userinfo)
Request-URI
(userinfo)
P-N-Dest-
Discern
Request-URI
(isub)
MG(SIP)> set cdn_pattern
Select Called Party Number to which you give
priority.
0=To[userinfo](default)
1=Request-URI[isub]
2=Request-URI[userinfo]
3=P-Called-Party-ID[userinfo]
4=P-Called-Party-ID[isub]
Input:0
0: userinfo part of the To header is
given priority (Default)
1: isub of Request-URI is given priority
2: userinfo part of Request-URI is
given priority
3: userinfo part of P-Called-Party-ID is
given priority
4: isub of P-Called-Party-ID is given
priority
Selected Parameter
Order of priority
1 2 3 4 5
0 To
P-N-Dest-
Discern
To (userinfo)
Request-URI
(isub)
Request-URI
(userinfo)
-
1 isub
P-N-Dest-
Discern
Request-URI
(isub)
Request-URI
(userinfo)
To (userinfo) -
2 Request-URI
P-N-Dest-
Discern
Request-URI
(userinfo)
Request-URI
(isub)
To (userinfo) -
3 P-Called-Party-ID
P-Called-
Party-ID
(userinfo)
To (userinfo)
Request-URI
(userinfo)
P-N-Dest-
Discern
Request-URI
(isub)
Selected
Parameter
Order of priority
1 2 3 4 5 6