NEC SV8500, Руководство пользователя

Страница: 2366 / 3438

VOL.2-2113
SR-MGC(E)
Note:
Specify the FTP Server No. in the range of 1 to 256.
[2] Set the data for FTP Server used for version upgrade. The parameters for FTP Server
Setting are as follows.
FTP Server No. [1 - 256]:
Enter the number to be allocated to the FTP number.
IP Address:
Enter the IP address of FTP server.
Port No. [1 - 65535]:
Enter the port number to connect FTP server (default data: 21).
Location Name [Maximum 20 characters]:
Enter any name as a location name where the FTP server is provided.
File Directory Path [1 to 128 characters]:
Enter the directory path to where the program file and the checksum file are stored
within the FTP server. (“0-9”, “A-Z”, “a-z”, “-”, “/”, “_”)
Program File Name [1 to 40 characters]:
Enter the program file name stored in the FTP server (“0-9”, “A-Z”, “a-z”, “-”, “.”,
“_”). An example Program file name is
4123_060_XXXX_120525.
User ID [4 to 16 characters]:
Enter the user name to log in to the FTP server. (0-9”, “A-Z”, “a-z”, “-”, “_”)
User Password [4 to 16 characters]:
Enter the user password to log in to the FTP server. (“0-9”, “A-Z”, “a-z”, “-”, “_”)
For personal security, asterisks (*) are displayed on the screen instead of the password.
[3] Click the Set button after filling in each parameter.
STEP 7: Set the Setting tab.
Specify the FTP Server No. in the Setting tab.
[1] Click the Setting tab in the CMNT command, enter the SR-MGC number in SR-MGC
No. and then click the Read button.
[2] Specify the FTP server number in FTP Server No. and then click the Set button. The
configured data will be outputted in the SR-MGC List.
Note:
Do not modify any data other than FTP Server No.
STEP 8: Backup the Data Memory.
Execute the MEM_HDD command to backup the Data Memory.
STEP 9: Execute the Program Copy.
Follow the procedure below to copy the program from the FTP server to SR-MGC.