NEC SV8500, Руководство пользователя

Страница: 1494 / 3438

VOL.2-1241
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
22. SHOW
Δ
PRI_LOOPBACK
This command is used to display the loop-back settings for TC.
23. SHOW Δ PRI_E1_1
This command is used to display E1 Dch settings for trunk.
MG-PRI(SIP)>SHOW PRI_LOOPBACK
value is 0x0000
The current setting is displayed.
Local Loop Back
Line Loop Back
Payload Loop Back
Dch Make Busy
Dch Loop Back
Dch Self-test :0
:0
:0
:0
:0
:0
- Local Loop-back (0/1=Disable/Enable)
- Line Loop-back (0/1=Disable/Enable)
- Payload Loop-back (0/1=Disable/Enable)
- Dch Make-Busy (0/1=Disable/Enable)
- Dch Loop-back0 (0: Fixed)
- Dch Self-Test (0: Fixed)
MG-PRI(SIP)>SHOW PRI_E1_1
value is 0x9080
The current setting is displayed.
Dch Control
Dch Mode
Dch Signal Logic
Dch-1 Drop/Insert
Dch-2 Drop/Insert
Drop/Insert Mode
Data Transfer Speed
Drop/Insert Time Slot
Dch Signaling Set :1
:0
:0
:1
:0
:0
:0
:16
:0
- Dch Control (0/1=Disable/Enable)
- Dch Mode (0/1=User/Network)
- Dch Signal Logic (0/1=Positive Logic/Negative Logic)
- Dch 1 (0/1=Disable/Enable)
- Dch 2 (0: Fixed)
- Mode (0/1=Fixed value/Set value)
- Data Transfer Speed (0=64K/1=56K/2=48K)
- Time Slot Number (1-31)
- Dch Signaling Set (0: Fixed)