NEC SV8500, Руководство пользователя

Страница: 328 / 3438

VOL.2-75
Analog 2MC (Analog Media Converter)
• Restoring Config Data via TFTP
<Data Assignment on TFTP Server>
STEP 1
If the name of the backup config file is not sysdata, rename it to “sysdata”.
STEP 2
Put the file in the root folder of TFTP server, and then start the TFTP server program.
STEP 3
Permit read behavior of this folder. For more information, refer to the appropriate manual at-
tached to the TFTP server program.
<Data Assignment on PCPro>
STEP 4
To search for the LENS of the target Analog 2MC, use the IPAN command.
STEP 5
To make environment setting for Telnet, use the ATUD command.
- Specify the LENS, which is belonging to the target Analog 2MC.
- Specify a user ID and a password, which are required for logging in Analog 2MC via Telnet.
- Input any letter for USER LEVEL because Analog 2MC does not use USERLEVEL.
- For VALID TIME, input a total of time required for completing this procedures.
Note:
A user ID and a password are temporary ones for download; you can specify them as you like
STEP 6
After completing the above, click the Set button.
<Data Assignment on Telnet PC>
STEP 7
Start a command prompt and enter “ telnet <Analog 2MC’s IP Address> ” to con-
nect Analog 2MC via Telnet.
IP Network
MC-2A MC-2A
PWR
ON
LINE
LINK 100M -OPERATION- Tx/Rx
0 1
TFTP Server
Telnet PC
PCPro
SYSTEM
Analog 2MC
(3) Control
Analog 2MC via
Telnet
(4) Copy a config file (Backup File)
from TFTP server via TFTP
(IP Address: 192.168.10.4)
Configdata
Note 1
Note 1
Note 1
: PCPro and Telnet both can be perfomed by single Personal Computer.
(2) Make environment setting for Telnet
( 1) Make environment setting for TFTP.