NEC SV8500, Руководство пользователя

Страница: 3033 / 3438

VOL.3-546
CHAPTER 4 CONFIGURATION SETUP
STEP 4: - When using Supplicant Mode of DtermIP(SIP):
When “1. Supplicant Mode” is selected by pressing “1” key.
Select whether to disable or enable Supplicant Mode. Press “1” key to disable the Supplicant
Mode. Press “2” key to enable the Supplicant Mode.
Supplicant Mode is disabled at default setting. The currently selected mode flashes.
When “3. Account (MD5)” is selected by pressing “3” key.
Set the User ID used for EAP-MD5 by pressing Dial keys [up to 32 characters (“0-9”, “A-Z”,
“a-z”, “*”, “#”, “.”, “-”, or “_”)]. Display is scrolled when up to 24 characters are set.
Note 1
When “4. Password (MD5)” is selected by pressing “4” key.
Set the password used for EAP-MD5 by pressing Dial keys [up to 32 characters (“0-9”, “A-Z”,
“a-z”, “*”, “#”, “.”, “-”, or “_”)]. Display is scrolled when up to 24 characters are set. The
entered password is indicated in a string of “*” on the display.
Note 1
When “5. EAPOL VLAN Mode” is selected by pressing “5” key.
Select whether to disable or enable EAPOL VLAN Mode. Press “1” to disable the EAPOL
VLAN Mode (not to add the VLAN tag toward the EAPOL packet). Press “2” to enable the
EAPOL VLAN Mode (to add the VLAN tag toward the EAPOL packet). EAPOL VLAN
Mode is enabled by the default setting.
Note 2
- When connecting PC equipped with Supplicant function to the DtermIP(SIP) PC port:
No data setting is required on 802.1X Settings.
Note 3
STEP 5: Press OK key and go back to the display of Step 3. Repeat Step 3-4 until all the necessary data is set.
STEP 6: When the all necessary data is set, press Exit key and go back to the Advanced Settings Menu.
STEP 7: Press Exit key on the Advanced Settings Menu to return to the Network Settings Menu.
STEP 8: Press Exit key on the Network Settings Menu and go back to the Main Menu.
STEP 9: Press Save key on the Main Menu to save the assigned data.
Note 1:
An input character or number changes depending on the number of times the digit key is pressed. For de-
tails, see the following table. For example, if the digit key “2” is pressed seven times, “2” is displayed on
the LCD. Then, press “2” again, “a” is displayed on the LCD. This key entry method is available only when
entering the following:
Cancel
OK
************************
Password?
BK
When selecting
“1. Supplicant Mode”:
When selecting
“3. Account (MD5)”:
When selecting
“4. Password (MD5)”:
When selecting
“5. EAPOL VLAN Mode”:
Cancel
OK
2.Enable
1.Disable
Cancel
OK
XXXXXXXXXXXXXXXXXXXXXXXX
Account?
BK
Cancel
OK
2.Enable
1.Disable
Note: “2. EAP Method” and “6. Certificate Delete” are not supported by DtermIP (SIP) with Firmware Version 4.1.x.x.
Note: To delete an entered character, press BK key.