NEC SV8500, Руководство пользователя

Страница: 428 / 3438

VOL.2-175
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
11. Setting Fax receiver PAD value:
Note:
The FAXRECVPAD command assigns the value to decrease the Fax signal level in the receiver (IP to an-
alog terminal) direction when the Fax signal is detected.
Note:
The total PAD value (Receiver PAD + Fax Receiver PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
12. Setting Fax sender PAD value:
Note:
The FAXSENDPAD command assigns the value to decrease the Fax signal level in the sender (analog ter-
minal to IP) direction when Fax signal is detected.
Note:
The total PAD value (Sender PAD + Fax Sender PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
13. Setting Health Check Receive Timer
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
MC(SIP)> SET FAXRECVPAD P1 P1 : Enter the Fax Receiver PAD value [0-20]
(default=3)
Fax Receiver PAD setting succeeded. Result is shown.
MC(SIP)> SET FAXSENDPAD P1
P1 : Enter the Fax Sender PAD value [0-20]
(default=0)
Fax Sender PAD setting succeeded.
Result is shown.
MC(SIP)> SET HC_TIMER P1 P1 : Enter the health check timer (second)
[120-240 (at intervals of 30 seconds)]
(default=150)
Health-Check Timer Timeout setting succeeded. Result is shown.