NEC SV8500, Руководство пользователя

Страница: 2282 / 3438

VOL.2-2029
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
24.3.5 Cable Connection
STEP 1: Connect the VS-32(Dual) to LAN by using an appropriate LAN cable.
Note:
Before connecting VS-32(Dual) to LAN, be sure to execute “PING” command to check
the following:
- Are there other devices having the same IP address overlapped?
- Is the new IP address assigned correct?
STEP 2: Check the lamp indications on the front panel of VS-32(Dual).
When VS-32(Dual) succeeded in registration, ON LINE lamp lights green after a while.
When feature data is assigned on the Telephony Server side by PCPro, the lamp corresponding to the
feature will go out. The lamp flashes when feature setting has not been completed.
That’s all for the starting up procedure of VS-32(Dual). Move on to the operation test.
Note:
Data memory backup is recommended after confirming the VS-32(Dual) assignment on the Telephony
Server. See the procedure below:
1. Execute ASECL command to confirm the setting.
2. On “Certified Terminal Assignment” tab, check “Certified Terminal” and then click Read button.
3. Certified Terminal List is displayed. Confirm the MAC address of assigned VS-32(Dual) is listed.
4. Execute MEM_HDD/MEM_HDD_N command to backup the data memory.
5. Select “MEM
→
HDD” in Function, “Data Memory” in Data Type, and then click Execute button.
* Refer to Office Data Backup in Operation and Maintenance Manual for more detailed information.
RELATED FEATURE NAME LAMP NAME
Multiple-Party Conference CONF
Announcement ANNC
External Music-on-Hold MOH
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
CF ANNC
MOH CONF
ALM PWR
ON
LINE
Ether
100M LINK
RESET
MUSIC
CONSOLE
VS-32(V)
FRONT
to LAN
Ether connector
(RJ-45)
pin assignment
S
+ S
-
R
+
* * * * R
-
8 7 6 5 4 3 2 1
Ether connector