NEC SV8500, Руководство пользователя

Страница: 1627 / 3438

VOL.2-1374
MG-SIP128 [MG-128SIPMGG]
This command is used to assign how to obtain cpn (calling party number), and to change the priority of
obtaining calling party number when a call terminates via SIP network.
When this command is enabled, calling party number is obtained according to the priority order shown
in the table below:
• The following shows the method of obtaining cpn when this feature is available.
[Setting Example]
Note:
The conditions of this command are as follows.
• Assign this command adjusting to the specifications on the SIP network where MG-SIP128 [MG-
128SIPMGG] connects.
• Select 2 when the caller ID blocking is judged by the userinfo in From header on the SIP network side spec-
ification.
e.g.) From: “01234567” <sip:anonymous@anonymous.invalid>
• Do not select 2 when the caller ID blocking is assigned by Displayname only on the SIP network side.
e.g.) From: “Anonymous” <sip:01234567@xxx.com> In this case, the cpn is informed when 2 is
selected.
• Numbers from 0 to 9, *, or # can only be obtained as a calling party number. When any other characters are
contained in the calling party number, the order of priority will shift to the next precedence.
However, if any characters other than the ones indicated above are detected in Displayname, the next and
later priority will be disregarded and the cpn will be handled as blocked.
e.g.) From: “0123ABC” <sip:01234567@xxx.com> In this case, the cpn will be handled as
blocked when 0 is selected.
Selected Parameter
Order of priority
1 2 3
0 Displayname Displayname Userinfo -
1 Userinfo Userinfo Displayname -
2 Anonymous
Userinfo (Anony-
mous)
Userinfo Displayname
3 P-Asserted-ID P-Asserted-ID Displayname Userinfo
MG(SIP) > set cpn_pattern
Select Calling Party Number to which you
give priority.
0=DisplayName(default)
1=Userinfo
2=Anonymous
3=P-Asserted-ID
Input:0
0: Display name is given priority (Default)
1: Userinfo is given priority
2: When Anonymous is detected in Userinfo,
cpn is handled as blocked, disregarding the
second priority and later.
3: P-Asserted-ID is given priority.