NEC SV8500, Руководство пользователя

Страница: 1986 / 3438

VOL.2-1733
MG-SIP16
9 SET Δ CPN_PATTERN
This command is used to assign how to obtain cpn (calling party number). It is possible to change the pri-
ority of obtaining calling party number when a call terminates via SIP network. The following shows the
method of obtaining cpn when this feature is available.
When this command is enabled, calling party number is obtained according to the priority order shown in
the table below:
Note: -
Assign this command adjusting to the specifications on SIP network.
-
Select 2 when the caller ID blocking is judged by the userinfo in From header on the SIP network side
specification.
e.g.) From: “01234567” <sip:anonymous@anonymous.invalid>
-
Do not select 2 when the caller ID blocking is assigned by Displayname only on the SIP network side.
e.g.) From: “Anonymous” <sip:01234567@xxx.com> In this case, the cpn is informed when 2 is select-
ed.
-
Numbers from 0 to 9, *, or # can only be obtained as a calling party number. When any other characters
are contained in the calling party number, the order of priority will shift to the next precedence.
However, if any characters other than the ones indicated above are detected in Displayname, the next and
later priority will be disregarded and the cpn will be handled as blocked.
e.g.) From: “0123ABC” <sip:01234567@xxx.com> In this case, the cpn will be handled as blocked
when 0 is selected.
-
This command is available for SP-3843 SIPMG PROG-B Issue 6 or later.
-
For the earlier versions of firmware, the command works as follows. Anonymous and P-Asserted-ID are
not available.
Selected Parameter
Order of priority
1 2 3
0 Displayname Displayname Userinfo -
1 Userinfo Userinfo Displayname -
2 Anonymous Userinfo (Anonymous) Userinfo Displayname
3 P-Asserted-ID P-Asserted-ID Displayname Userinfo
MG(SIP) > set cpn_pattern
What calling party number is given priority?
(0:Displayname/1:Userinfo/2:Anonymous/3:P-Asserted-ID(default=0)):
• 0: Display name is given
priority (default)
• 1: Userinfo is given prior-
ity
• 2: When Anonymous is
detected in Userinfo, cpn
is handled as blocked, dis-
regarding the second prior-
ity and later.
• 3: P-Asserted-ID is given
priority.
When this feature is unavailable, calling party number is obtained in the following order
Order of priority
Obtaining pattern
1 Obtain from Remote-Name (Display Name section)