NEC SV8500, Руководство пользователя

Страница: 1349 / 3438

VOL.2-1096
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
8. SET
Δ
DTMF_IN
Δ
P1
This command is used to specify whether Inband DTMF is used or not.
Note:
DTMF relay of in-band signaling is effective only for the speech transferring of CODEC G.711. As this
function cannot distinguish the CODEC type, make sure the CODEC type of MG(PRI) is adjusted for this
function.
9. SET Δ E_T_TIME Δ P1
This command is used to specify the executing time of Echo Canceller Training Feature. To make this as-
signment effective, it is required to execute the “SAVE” command and to restart before exiting the main-
tenance command.
10. SET Δ E_T_WAITTIME Δ P1
This command is used to specify the waiting time before the Training Feature mode of Echo Canceller be-
gins. Echo Canceller Feature is used to prevent initial Echo (ranging from 500 to 1ms) from occurring in
the beginning of speech to PBX. To make this assignment effective, it is required to execute the “SAVE”
command and to restart before exiting the maintenance command.
11. SET
Δ
EC_TRAINING
Δ
P1
This command is used to enable/disable the Training Feature mode of Echo Canceller. Echo Canceller Fea-
ture is used to prevent initial Echo (ranging from 500 to 1ms) from occurring in the beginning of speech to
PBX. To make this assignment effective, it is required to execute the “SAVE” command and to restart be-
fore exiting the maintenance command.
MG-PRI(SIP)>SET DTMF_IN ON P1 -Select either
OFF =DTMF relay of in-band signaling is not used (default)
ON =DTMF relay of in-band signaling is used
Inband DTMF Relay setting succeeded. Result is displayed.
MG-PRI(SIP)>SET E_T_TIME 16
P1 -Specify a executing time before the training
feature starts (ms)
0-32 =Executing Time (1 counter indicates 10ms)
EC Training Feature Timer setting succeeded.
Result is displayed.
MG-PRI(SIP)>SET E_T_WAITTIME 0 P1 -Specify a waiting time before the training
feature starts (ms)
0-100 =Waiting Time (1 counter indicates
10ms)
EC Training Start Wait Timer setting succeeded. Result is displayed.
MG-PRI(SIP)>SET EC_TRAINING ON
P1 -Specify the following:
ON =Training function is valid
OFF =Training function is invalid
ONCE =Training function is valid only once
(default)
EC Training Feature setting succeeded.
Result is displayed.