NEC SV8500, Руководство пользователя

Страница: 185 / 3438

VOL.1-125
CHAPTER 2 IP-RELATED BASIC FEATURE PROGRAMMING
for AIVCN:
A FPC: Fusion Point Code of the self-Location. (1-253)
A LOC-ID: Location ID of the self-Location. (0-4095)
B FPC:
Fusion Point Code of the target Location. (1-253)
B: LOC-ID: Location ID of the target Location. (0-4095)
[SETTING OF JITTER BUFFER]
Check the “SETTING OF JITTER BUFFER” check box to assign the following Jitter Buffer data.
Note:
If the check box is not checked, the default settings (JB_MIN = 1 (10ms), JB_MAX = 30 (300ms)) will
be provided.
JB_MIN: Jitter Buffer minimum value
JB_MAX: Jitter Buffer maximum value
[SETTING OF PAYLOAD]
Check the “SETTING OF PAYLOAD” check box to assign the following Payload data.
PRI1-PRI4: Select the Payload Type and Payload Size in order of precedence (PRI1(high)

PRI4
(low))
PAYLOAD TYPE (Payload Type):
• G.711
• G.729a
• G.723.1 (5.3K

6.3K)
• G.723.1 (6.3K

5.3K)
• G.722
Note 1
• AMR-NB Note 2
• AMR-WB
Note 2
• G.711

law (FEC) Note 2
,
Note 3
• G.711 A law (FEC)
Note 2
,
Note 3
• G.729a (FEC) Note 2
,
Note 3
• G.722 (FEC)
Note 2
,
Note 3
• AMR-NB (FEC) Note 2
,
Note 3
• AMR-WB (FEC)
Note 2
,
Note 3
Note 1:
Payload Type G.722 is effective for the following connections:
• The connection between DtermSP30s Version15
• The connection between DT700 Series (DT730/DT730G/DT750)
• The connection between DtermSP30 Version 15 and DT700 Series (DT730/DT730G/DT750)
Note 2: These Payload Types have been available for DtermSP30 Version 15. These data are effective only for
the connection between DtermSP30s Version 15.
Note 3:
When Payload Type with “FEC” is selected, the data that is not transmitted correctly because of packet
loss or bit error can be corrected according to the redundant data by the method of Forward Error Cor-
rection (FEC).