NEC SV8500, Руководство пользователя

Страница: 613 / 3438

VOL.2-360
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
MAINTENANCE COMMAND FOR MCMG
The Maintenance Console uses the commands listed in.
COMMAND No. SUB COMMAND FUNCTION REMARKS
SET
(both MC and
MG sides)
1 DEFAULTROUTE Setting Default Gateway
2 DHCP Setting DHCP
3 DRSADDRESS Setting DRS Address
4 DRSTOS Setting ToS of DRS session
5 HC_TIMER Setting Health Check Receive Timer
6 INTERFACE Setting communication speed for LAN interface
7 IPADDRESS Setting IP Address and Subnet Mask
8 STARTPORT Setting RTP Start Port number
9 VLAN Setting VLAN
10 WARNING_TONE Setting Warning Tone control
COMMAND No. SUB COMMAND FUNCTION REMARKS
SET
(MC side)
1 BURSTPATTERN Setting Burst Ringer Pattern
2 CODEC_COEF Setting CODEC Coefficiency
3 DSP_ECFB Setting DSP echo canceller for FAX communication
4 EC_TRAINING Setting Training feature mode of echo canceller
5 FAXERRORDETECT Setting Fax enable timer
6 FAXRECVPAD Setting Fax receiver PAD value
7 FAXSENDPAD Setting Fax sender PAD value
8 MUSICTYPE Setting Internal Music-on-Hold type
9 OPEN Setting Open/Reverse mode
10 PAD Setting default receiver PAD value
11 PRERINGING Setting Pre-Ringing
12 RINGFREQ Setting frequency of Ringer
13 SENDPAD Setting default sender PAD value
14 SMOOTH_PAD Setting DSP smooth PAD mode
15 STUTTERDT Setting Stutter Dial Tone
16 SYNCRINGING Setting synchronous Ringer mode