NEC SV8500, Руководство пользователя

Страница: 341 / 3438

VOL.2-88
Analog 2MC (Analog Media Converter)
7. Setting ToS of DRS session:
Note:
The result of data setting is shown in a 1-byte (hexadecimal) format in accordance with the setting dialog
followed by the prompt. The meaning of 1-byte data is shown below:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Enter sub command name PRECEDENCE to set the
parameters such as Delay, Throughput, Reliability, and
Cost. Specify the value to each parameter.
Line 2: Precedence: 0-7 (low-high) (default= 6 )
Line 3: Delay: 0/1= Normal (default)/Low Delay ON
Line 4: Throughput:
0/1= Normal (default)/High Throughput ON
Line 5: Reliability:
0/1= Normal (default)/High Reliability ON
Line 6: Cost: 0/1= Normal (default)/Cost Precedence ON
Line 7: Result is shown
2A-MC>SET DRSTOS PRECEDENCE
PRECEDENCE (0-7) : 6
DELAY (0/1) : 0
THROUGHPUT (0/1) : 0
RELIABILITY (0/1) : 0
COST (0/1) : 0
DRS TOS setting succeeded.(0xC0)
2A-MC>_
Prec.=PRECEDENCE (3 bits)
D=Delay
T=Throughput
R=Reliability
C=Cost
Prec
D T R C
Line 1: Enter the sub command name VALUE to set the DRS
setting value directly.
Line 2: Specify the value in the range of 00-FF (default= C0 )
Line 3: Result is shown
2A-MC>SET DRSTOS VALUE
TOS (00-FF) : C0
DRS TOS setting succeeded. (0xC0)
2A-MC>_