NEC SV8500, Руководство пользователя

Страница: 3241 / 3438

VOL.3-754
CHAPTER 4 CONFIGURATION SETUP
C
B
STEP 10: On [Network Settings] menu, select “3. Subnet Mask.” Assign the Subnet Mask using the digit keys.
[Subnet Mask]
*'For'.'
0. 0. 0. 0
BK Cancel OK
[Network Settings]
Exit
1.IP Address
2.Default Gateway
3.Subnet Mask
STEP 11: The LCD displays [Network Settings] menu.
Note:
When Backup IP is in service, this data will be also overwritten by obtained Subnet Mask if DT700
Series obtains an IP address from DHCP server.
STEP 12: On [Network Settings] menu, select “2.Default Gateway.” Assign the Default Gateway address using
the digit keys.
[Default Gateway]
*'For'.'
0. 0. 0. 0
BK Cancel OK
Note:
When Backup IP is in service, this data will be overwritten by obtained Default Gateway address
if DT700 Series obtains an IP address from DHCP server. If obtained data does not have a Default
Gateway address, the existing data is maintained.
- Press the software key for “OK” when the [Subnet Mask] setting is
complete.
- Use "*" to separate each byte.
- Press the software key for "BK" to delete the input value.
- Press the software key for “OK” when the [Default Gateway] setting
is complete.
- Use "*" to separate each byte.
- Press the software key for "BK" to delete the input value.
[Network Settings]
Exit
1.IP Address
2.Default Gateway
3.Subnet Mask
STEP 13: The LCD displays [Network Settings] menu.