NEC SV8500, Руководство пользователя

Страница: 2140 / 3438

VOL.2-1887
MG-SIP16 [SCA-16SIPMG(US)]
Note:
Assign this command adjusting to the specifications on SIP network.
10 SET
Δ
CHECK_NUMBER
This command is used to assign a limit to number of digits for calling/called party number.
A calling/called party number sent via the Telephony Server network may be limited to numbers only.
Note:
Assign this command adjusting to the specifications on SIP network.
11 SET Δ CODEC_CHANGE
This command is used to enable Codec Change function and G711 Fax renegotiation.
Codec Change function enables a call to be retained when a forwarding call is placed to a destination lo-
cated in the SIP network and the payload type is different between an intermediate station and the destina-
1 isub
P-N-Dest-
Discern
Request-URI
(isub)
Request-URI
(userinfo)
To (userinfo) -
2 Request-URI
P-N-Dest-
Discern
Request-URI
(userinfo)
Request-URI
(isub)
To (userinfo) -
3 P-Called-Party-ID
P-Called-
Party-ID
(userinfo)
To (userinfo)
Request-URI
(userinfo)
P-N-Dest-
Discern
Request-URI
(isub)
MG(SIP) > set cdn_pattern
Active called-party-number?
(0:To:userinfo/1:isub/2:Request-URI/3:P-Called-Party-ID(default=0)):0
• Select a type to obtain
called number information.
0: userinfo part of the To
header is given priority
(Default)
1: isub of Request-URI is
given priority
2: userinfo part of
Request-URI is given
priority
3: userinfo part of P-
Called-Party-ID is
given priority
MG(SIP) > set check_number
Is this function enable or disable?
(0:disable/1:enable(default=0)): _
• Enter 0 or 1 (default=0).
0 = Disable (default)
• 1 =Limit to numbers only
Selected Parameter
Order of priority
1 2 3 4 5