NEC SV8500, Руководство пользователя

Страница: 1552 / 3438

VOL.2-1299
MG-T1(SIP) [SCA-24DTIA]
STEP 4
Permit read behavior of this directory. For more information, refer to the appropriate manual
attached to the TFTP server program.
STEP 5
Change the network setting (IP address and subnet mask) of the PC (used as TFTP server)
temporarily to connect to the MG-T1(SIP).
IP address:
10.41.1.250
Subnet mask: 255.255.255.0
STEP 6
Start the TFTP program.
STEP 7
Power on MG-T1(SIP).
STEP 8
On Serial Console, activate HyperTerminal and set the following:
Bit per second:
9600bps
Data bits: 8bit
Parity: None
Stop bit: 1bit
Flow control: None
STEP 9
After a prompt (
MG-T1(SIP)>
) is displayed, enter “
download
”.
STEP 10
When “
Do you need download?
” message is displayed, enter “
y
”.
STEP 11
The current settings of MG-T1(SIP) are displayed, and then the screen asks you to input
TFTP Server IP Address. Enter the TFTP server IP address.
STEP 12
The current settings of MG-T1(SIP) and TFTP server are displayed, make sure the settings.
If you need to modify the settings, select a number (1-4) to modify the item. If all the settings
are correct, enter “
y
”.
STEP 13
Download menu is displayed, and then select “
1
” (Download of all programs).
STEP 14
IP address information setting is displayed, and then select “
1
” (current setting).
STEP 15
Other configuration setting is displayed, and then select “
2
” (current setting).
After download process is completed, MG-T1(SIP) will reboot.
STEP 16
Turn off and on the power of the MG-T1(SIP).
STEP 17
After a prompt (
->
) is displayed again, enter “
usrConsole
”.
STEP 18
After a prompt (
MG-T1(SIP)>
) is displayed, enter “
show version
” to display the firm-
ware information of MG-T1(SIP).