NEC SV8500, Руководство пользователя

Страница: 626 / 3438

VOL.2-373
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
12. Setting frequency of Ringer:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
13. Setting default sender PAD value:
Note:
The SENDPAD command assigns the value to decrease voice level in the sender (analog terminal to IP)
direction.
Note:
The total PAD value (Sender PAD + Fax Sender PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
14. Setting DSP smooth PAD mode:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Enter 0 or 1 to specify the Frequency of Ringer
0=20 Hz (default)
1=25 Hz
Line 2: Result is shown
MC-MG> SET RINGFREQ 0
Frequency of Ringer setting succeeded. (frequency is 20Hz.)
Line 1: Enter the PAD value in the range of -10dB ~
20dB after the command name (default=0)
Line 2: Result is shown
MC-MG> SET SENDPAD 0
Default Sender PAD setting succeeded.
Line 1: Enter a value of smooth PAD(1-5, OFF)
OFF=Set smooth PAD mode to OFF
1=2.0dBm (default)
2=-5.2dBm
3=-2.1dBm
4=0dBm
5=-4.2dBm
Line 2: Result is shown
MC-MG> SET SMOOTH_PAD 1
Smooth PAD Mode setting succeeded.