Mitsubishi Electric 3F-14C-WINE, Руководство пользователя

Страница: 380 / 646

17-380 17-380
Program : When [All] is designated, all of the robot program files in the folder will be sent
to the robot controller.
When [Select] is designated, the specified robot program files in the folder will
be sent to the robot controller. To specify which files to send, click the [Select...]
button and specify the files in the screen that is displayed.
Restore after deleting
programs of
existence.
: All robot programs in the robot controller are deleted, and then the restore is
performed.
Parameter : When [All] is designated, all of the parameter files in the folder will be sent to the
robot controller.
When [Select] is designated, the parameters designated from among
parameters in the folder will be sent to the robot controller. To specify which
parameters to send, click the [Select...] button and specify the parameters in the
screen (described later) t is displayed.
System Program
: System base program files in the designated folder will be sent to the robot
controller.
(All Files) : If batch backup information is restored with all programs, parameters, and
system programs selected, all of the files (excluding BKUP.SYS and
MECHA.SYS) in the designated folder will be sent to the robot controller.
Restore history file
data Restore the robot controller history file data. Only valid when the programs,
parameter files, and system programs are all selected.
Change Robot Origin
Data : This is valid only when parameter information is selected in the backup
information. Operations for when this checkbox is checked and when it is not
are as in
"Table 17-1 Operations for "Change Robot Arm Serial Number
Too"" .
Change Robot Arm
Serial Number : The robot arm serial number also is rewritten.
Restore the file
manager’s data : Files targeted by the file manager function (refer to 18.4 ) also are rewritten.
Restore Operating
Information : The operating information (power ON time, operating time, servo ON time,
battery remaining time) of the robot controller is rewritten.
Restore maintenance
forecast data. : Information relating to maintenance forecasts also is rewritten. (same
information as the information restored at " 15.3.7 Others ")
By click the [Select...] button, the screen for selecting parameters for restore is displayed. Only select the
parameters you want to transfer to robot controller and click the [OK] button.
By unselect the parameters related the kind of robot model, the backup data can be used to different kind of
robot.
Figure 17-11 Backup Project Tree Diagram