Mitsubishi Electric 3F-14C-WINE, Руководство пользователя

Страница: 290 / 646

14-290 14-290
(6) Rename
You can change the variable to be monitored by changing the name of the variable registered in the variable
monitor.
(7)
Changing variables
You can change the values of program external variables registered on the variables monitor.
(8) Load
You can load variables to be monitored on the program external variables monitor from a file.
(9) Save
You can save a list of the variables being monitored on the program external variables monitor to a file.
At the end of the screen, the set display format, variables are automatically saved and reflected at the next
display.
Be careful when changing the value of a variable.
When you change the value of a variable, the operation target position of the robot may change and
interference with the surroundings may result. This is particularly dangerous during robot operation,
so check carefully before changing the value of a parameter.
Caution
Depending on the type of variable, the Format drop-down menu
will not be displayed.
You can change the display format only when the type of the variable is "integer type" and the
value after the decimal point is "real type".
However, "real type" can not be changed to "unsigned decimal".
Caution