Mitsubishi Electric 3F-14C-WINE, Руководство пользователя

Страница: 375 / 646

17-375 17-375
17.1.1. Saving data from one robot controller
(1) From the project tree, open the target project [Backup]. In the backup tree, "All", "Program", "Parameter", and
"System program" are displayed.
Figure 17-1 Backup Project Tree Diagram
All Saves all files (robot programs, parameter files, etc.) in the robot controller into
the designated folder.
Performs batch backup during the backup and restore for the same robot.
Program
Saves the robot program file into the designated folder.
It will back up only the robot program file. This is useful when you want to restore
only the robot programs to another robot.
Parameter Saves the parameter files into the designated folder.
It will back up only the parameter file. This is useful when you want to restore
only the parameters to another robot.
System Program
Saves the system base program file into the designated folder.
The system based program files are included, such as program external
variables. Use this when you want to back up only the program external
variables.
(2) Double click the items to backup.
Figure 17-2 Backup (When Batch Is Selected)
The backup screen opens, and the check box of the selected backup will be ON.
With the subject check box ON, you can change the backup method.
[
Parameter List Files
] : This is used to edit the parameter information saved by backup in offline
mode, and is not required for backup. If this is not checked, the time
required to save all files will be shortened.
Double-click