Mitsubishi Electric 3F-14C-WINE, Руководство пользователя

Страница: 381 / 646

17-381 17-381
Table 17-1 Operations for "Change Robot Arm Serial Number Too"
Controller
Check ON Check OFF
CR800/
750/
700
series
or
CR
ｎ
-500
series
J2 edition
or later
Restore
files
<
after restore
>
controller
Origin data(A)
parameters for
position repair (A)
Parameters(A)
< リストア前 >
Origin data(B)
parameters for
position repair (B)
Parameters(B)
controller
Origin data(B)
parameters for
position repair (B)
Parameters(B)
<
before restore
>
An initial value will be used if the file to
be restored does not have any
revision parameter for position repair.
Transfers the backed-up file as is. The origin
data is overwritten.
Restore
files
<
after restore
>
controller
Origind ata(A)
Parameters(A)
< リストア前 >
Origin data(B)
parameters for
position repair (B)
Parameters(B)
controller
Origin data(A)
parameters for
position repair (A)
Parameters(B)
<
before restore
>
parameters for
position repair (A)
A backed-up file is transferred. However, for
the origin data and the parameters for
recovering positions, the information inside the
controller is retained.
CR
ｎ
-500
series
H7 edition
or earlier
<
after restore
>
controller
Origin data (A)
Parameters(A)
controller
Origin data (B)
Parame ters(B)
<
before restore
>
Revision parameters for position
repair will not be written
Restore
files
< リストア前 >
Origin data(B)
parameters for
position repair (B)
Parameters(B)
Transfers a backed-up file as is. The origin data
is overwritten.
Restore
files
<
after restore
>
controller
Origin data(A)
Parameters(A)
< リストア前 >
Origin data(B)
parameters for
position repair (B)
Parameters(B)
controller
Origin data(B)
Parameters
(B)
<
before restore
>
Revision parameters for position
repair will not be written.
A backed-up file is transferred. However, as for
the origin data, the information inside the
controller is retained.
Be aware that if communication is cancelled during a series of restore processes, the position revision
parameters generated with the "Position repair" function and the origin data may be changed.