Mitsubishi Electric 3F-14C-WINE, Руководство пользователя

Страница: 637 / 646

27-637 27-637
5. Communication (Ethernet)
[Note] When using Ethernet with a CRn-500 series robot controller, the robot controller must have the optional
Ethernet card.
If you cannot communicate with the robot controller using Ethernet, check the following.
Also, see
"3. Communications (general)" .
Check item or cause Solution
What color is Communication Server 2?
Return Communication Server 2 to icon status
and check the color displayed for the line
state.
Red
The problem may be that the robot
controller is not connected correctly.
See the items in
"(1) When
Communication Server 2 is red
(Ethernet)"
.
Green
The problem may be that the robot
controller and the computer have different
communication settings.
See the items in
"(2) When
Communication Server 2 is green
(Ethernet)"
.
Yellow See "3 Communications (general)" .
Light blue
See "3 Communications (general)" .
Blue
(1)
When Communication Server 2 is red (Ethernet)
If Communication Server 2 is displayed red with communication with the robot controller set to Ethernet,
check the following.
Check item or cause Solution
In the communication settings for this
software, is the communication method set to
USB or RS-232? Change the communication method to TCP/IP.
(2)
When Communication Server 2 is green (Ethernet)
If Communication Server 2 is displayed green with communication with the robot controller set to Ethernet,
check the following.
Check item or cause Solution
Are the robot controller's network settings
correct? Make the computer's network settings.
Check that the IP address, gateway, subnet mask, and
other network settings are correct.
Check on the computer [Control Panel] – [Network
Settings].
* For details on the network settings, please consult
with your network administrator.
Is the robot controller's IP address set
correctly in the communication settings? Correctly set the IP address of the robot controller
connected to.