15-345
15-345
15.4. Position Repair Function
The position repair function is restricted by the usable models and controller software versions. See
15-9 Supported Robot Controllers and Model"
.
The "position repair function" is used when a tool is deformed by a collision or the origin is out of place because
the motor has been replaced. It is possible to use the previous position data in the controller simply by reteaching
part of the position data within the robot program. (Position repair generates parameters to correct the position
deviation and corrects all the position data in the robot controller.)
However, understand that there are some cases that position repair cannot restore, such as applications
requiring high precision and major mechanical damage to a robot from a collision.
Also, restrictions on a robot's degrees of freedom can make it impossible to recover with position repair. Since
vertical 5-axis robots and horizontal 4-axis robots are restricted as shown in
"Table 15-8 The limit by degree of
,
positional deviations related to these restrictions cannot be corrected with this function. In this case,
either reteach manually or correct the deviating section (for example, by replacing a bent hand).
Table 15-8 The limit by degree of freedom
No.
Robot model
The limit by degree of freedom
1
Vertical 5-axis robot
It cannot move in the direction of the C element of the
Cartesian position.
2
Horizontal 4-axis robot
It cannot move in the direction of the A, B elements of the
Cartesian position.
When a password is registered in parameters or files by the robot
controller's security function, it is not possible to operate the Position repair
Function.
When a password is registered in “parameters” or “files” by the robot controller security function, it
is not possible to operate the Position Repair Function.
○
: Enabled
、
×
: Disabled
Item to which password of security function is registered.
Program
Parameter
File
Position repair Function
○
×
×
Please delete the password of robot controller's security function when you operate these.
Please refer to
for how to delete the password.
For details on setting security functions (registering passwords) and releasing security functions
(deleting passwords) on robot controllers, refer to
"Table 15-12 Compliant version of this
.
The position repair function cannot be used
with Movemaster commands.
The position repair function is only supported by MELFA-BASIC IV, MELFA-BASIC V and
MELFA-BASIC VI. It cannot be used with Movemaster commands.
Caution
Caution
Содержание 3F-14C-WINE
