manualshive.com logo in svg

Dell OptiPlex 760, Руководство по обслуживанию

Характеристики Dell OptiPlex 760 доступны для скачивания бесплатно на manualshive.com. Здесь вы сможете получить подробное руководство пользователя с описанием всех функций и характеристик этого продукта. Узнайте больше о вашем устройстве, загрузив руководство на manualshive.com.

Поделиться
Скачать
background image

l

 

Be formatted using the FAT16 file system with no system files 

 

l

 

Contain only the 

setup.bin

 file 

 

To provision AMT using a USB key, plug the USB key into a USB port prior to boot. During POST, the BIOS displays a message stating that the computer is being 
provisioned. 

 

 

Alert Standard Format 

Alert Standard Format (ASF) is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques. The 
standard is designed to generate an alert on potential security and fault conditions when the operating system is in a sleep mode or the computer is turned 
off. ASF is designed to supersede previous operating-system-absent alerting technologies. 

Your computer supports the following ASF version 1.03 and 2.0 alerts and remote capabilities: 

ASF allows Remote Management and Control Protocol (RMCP) messages to be exchanged between a remote management console and a client computer that 
is in a "pre-operating system" or "operating system-absent" state. RMCP messages can be sent to instruct a client computer to start up, shut down, or 
restart. 

For more information about Dell's ASF implementation, see the 

ASF User's Guide

 and the 

ASF Administrator's Guide

, which are available on the Dell Support 

website at 

support.dell.com

. 

 

 

Dell OpenManage™ Applications

 

You can manage your computer via IT Assistant and Dell OpenManage Client Instrumentation (OMCI). 

IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages assets, configurations, events 
(alerts), and security for computers equipped with industry-standard management software. It supports instrumentation that conforms to SNMP and CIM 
industry standards. 

For information on IT Assistant, see the 

Dell OpenManage IT Assistant User's Guide 

available on the Dell Support website at 

support.dell.com

. 

Dell OpenManage Client Instrumentation is software that enables remote management programs such as IT Assistant to do the following: 

l

 

Access information about your computer, such as how many processors it has and what operating system it is running. 

 

l

 

Monitor the status of your computer, such as listening for thermal alerts from temperature probes or hard drive failure alerts from storage devices. 

 

A computer that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant is a managed computer. For information about Dell 
OpenManage Client Instrumentation, see the 

Dell OpenManage Client Instrumentation User's Guide 

available on the Dell Support website at 

support.dell.com

. 

 

 

Dell Client Manager (DCM) 

 

 

Dell Client Manager (DCM) Console  

The Dell Client Manager (DCM) console allows you to configure, manage, and monitor Dell computers on a corporate network via a simple GUI interface. 
Through the DCM console you can manage assets, configurations, events (alerts), status, and security for computers equipped with industry-standard 
management software. For information about standards supported by DCM, see 

www.altiris.com

. 

For information about the DCM console, see 

www.altiris.com

 or the Dell Support website at 

support.dell.com

. 

The DCM console also allows you to: 

 

NOTE: 

The key should not be bootable.

 

 

Alert 

 

 

Description 

Chassis: Chassis Intrusion 

–

 Physical Security 

Violation/Chassis Intrusion 

–

 Physical Security Violation 

Event Cleared

 

The computer chassis with the chassis intrusion feature (optional on some 
computers) installed and enabled has been opened or the chassis intrusion alert has 
been cleared. 

CPU: Emergency Shutdown Event

 

The processor temperature is too hot and the power supply has shut down. 

Cooling Device: Generic Critical Fan Failure/Generic Critical 

Fan Failure Cleared

 

The fan speed (rpm) is out of limits or the fan speed (rpm) problem has been 
resolved. 

Temperature: Generic Critical Temperature Problem/Generic 

Critical Temperature Problem Cleared

 

The computer temperature is out of limits or the computer temperature problem has 
been resolved. 

Battery Low

 

The computer battery has reached a voltage of 2.2 V or lower. 

 

NOTE: 

Either Dell OpenManage™ applications and Dell™ Client Manager (DCM) are available for your computer to help meet your system management 

needs. See 

Dell Client Manager (DCM)

 for information about DCM. 

 

NOTE: 

Either Dell™ Client Manager (DCM) or Dell OpenManage™ applications are available for your computer to help meet your system management 

needs. See 

Dell OpenManage™ Applications

 for information about Dell OpenManage products. 

Содержание OptiPlex 760












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 760

IBM NetVista A22p Kurzübersicht preview
NetVista A22p
Бренд: IBM Страницы: 78
IBM NetVista A22p Manual D'Utilisation preview
NetVista A22p
Бренд: IBM Страницы: 90
Technologic Systems TS-5500 User Manual preview
TS-5500
Бренд: Technologic Systems Страницы: 38
IBM IntelliStation Z Pro 6221 Installation Manual preview
IntelliStation Z Pro 6221
Бренд: IBM Страницы: 110
C&T BCO-2000-V1605B User Manual preview
BCO-2000-V1605B
Бренд: C&T Страницы: 86
GABOR DMSS-502 User Manual preview
DMSS-502
Бренд: GABOR Страницы: 24
Compaq ProLiant DL580 Setup And Installation Manual preview
ProLiant DL580
Бренд: Compaq Страницы: 222
Gateway E4610D Reference Manual preview
E4610D
Бренд: Gateway Страницы: 134
NUANCE PowerScribe User Manual preview
PowerScribe
Бренд: NUANCE Страницы: 2
Asus B203 User Manual preview
B203
Бренд: Asus Страницы: 28
Asus Barebone System A7VT400 User Manual preview
Barebone System A7VT400
Бренд: Asus Страницы: 98
Asus Asteio D22 Quick Start Manual preview
Asteio D22
Бренд: Asus Страницы: 20
Asus B5081ZD User Manual preview
B5081ZD
Бренд: Asus Страницы: 44
Asus B204 User Manual preview
B204
Бренд: Asus Страницы: 104
Asus Barebone System T2-PH2 User Manual preview
Barebone System T2-PH2
Бренд: Asus Страницы: 114
Asus Asteio D20 User Manual preview
Asteio D20
Бренд: Asus Страницы: 252
KME A2E7X Manual preview
A2E7X
Бренд: KME Страницы: 2
Sony VAIO VGN-UX180P Specifications preview
VAIO VGN-UX180P
Бренд: Sony Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды