Dell OptiPlex 760 Скачать руководство пользователя страница 151

Страница: 151 / 203

Video

Primary Video

Specifies which video controller is primary when two video controllers are present on the computer.

Auto

(default)

Onboard/PEG

Performance

Multi Core Support

Specifies whether one or all the cores of the processor will be enabled.

NOTE:

The performance of some applications improve with additional cores.

Intel

® SpeedStep™

Enables or disables the Intel SpeedStep mode.

This option is disabled by default.

Limit CPUID Value

Enables or disables the CPUID limit.

This option is disabled by default.

HDD Acoustic Mode

Sets the performance speed and noise level of your hard drive to:

Bypass

(default)

Quiet

Suggested

Performance

Virtulization Support

VT for Direct

I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel Virtulization
technology for direct I/O.

Security

Administrative

Password

Provides restricted access to the computer's system setup program in the same way that access to the system can be restricted
with the

System Password

option.

This option is not set by default.

System Password

Displays the current status of the system's password security feature and allows a new system password to be assigned and
verified.

This option is not set by default.

Password Changes

Enables or disables the user from changing the system password without the administrative password.

This option is enabled by default.

TPM Security

Enables or disables the trusted platform module (TPM) security.

You can set the TPM security to:

Deactivate

(default)

Activate

Clear

NOTE:

When TPM Security is set to

Clear

the system setup program clears the user information stored in the TPM.

CPU XD Support

Enables or disables the execute disable mode of the processor.

This option is enabled by default.

Computrace(R)

Enables or disables the optional Computrace

service designed for asset management.

You can set this option to:

Deactivate

(default)

Disable

Activate

SATA-0 Password

Displays the current status of the password set for the hard drive connected to the SATA-0 connector on the system board.

You can also set a new password. This option is not set by default.

NOTE:

The system setup program displays a password for each of the hard drives connected to your system board.

Power Management

Содержание OptiPlex 760












































































































































































































Результаты поиска

Содержание OptiPlex 760

Отзывы:

Похожие инструкции для OptiPlex 760

Бренды по названию

Популярные бренды

Dell OptiPlex 760, Руководство по обслуживанию

Результаты поиска

Содержание OptiPlex 760

Отзывы:

Похожие инструкции для OptiPlex 760

Бренды по названию

Популярные бренды