Dell OptiPlex 760 Скачать руководство пользователя страница 154

Страница: 154 / 203

Use the arrow keys to select the appropriate device (for the current boot only).

Changing the Boot Sequence for Future Boots

Enter System Setup (see

Entering System Setup

Click to expand

SystemBoard

and then click

Boot Sequence

Highlight the appropriate device from the list of devices on the right and then click the up or down arrows to move the item you want to change.

Click

Apply

to save the changes and then click

Exit

to exit System Setup and resume the boot process.

Booting to a USB Device

Memory Key

Insert the memory key into a USB port and restart the computer.

When

F12 = Boot Menu

appears in the upper-right corner of the screen, press <F12>.

The BIOS detects the device and adds the USB device option to the boot menu.

From the boot menu, select the number that appears next to the USB device.

The computer boots to the USB device.

Floppy Drive

In system setup, set the

Diskette Drive

option to

USB

Save and exit system setup.

Connect the USB floppy drive, insert a bootable floppy, and re-boot the computer.

Password Protection

System Password

Option Settings

You cannot change or enter a new system password if either of the following two options is displayed:

Set

—

A system password is assigned.

Disabled

—

The system password is disabled by a jumper setting on the system board.

You can only assign a system password when the following option is displayed:

Not Set

—

No system password is assigned and the password jumper on the system board is in the enabled position (the default setting).

NOTE:

To boot to a USB device, the device must be bootable. To ensure that a device is bootable, check the device documentation.

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

CAUTION:

Although passwords provide security for the data on your computer, they are not foolproof. If your data requires more security, it is

your responsibility to obtain and use additional forms of protection, such as data encryption programs.

CAUTION:

If you leave your computer running and unattended without having a system password assigned, or if you leave your computer

unlocked so that someone can disable the password by changing a jumper setting, anyone can access the data stored on your hard drive.

Содержание OptiPlex 760












































































































































































































Результаты поиска

Содержание OptiPlex 760

Отзывы:

Dell OptiPlex 760, Руководство по обслуживанию, Страница: 154 / 203

Результаты поиска

Содержание OptiPlex 760

Отзывы: