Beckman Coulter UniCel DxC Synchron 600 Скачать руководство пользователя страница 113

Страница: 113 / 510

Report Setup

Introduction

UniCel DxC Systems Instructions For Use A13914

System Setup Options

October 2005

Page 4-21

Report Setup

Introduction

This feature allows the operator to select the following options:

• Enable or disable printing of Patient and Control Reports

• Define a Report Header to print at the top of each report

• Select from a variety of Patient Report formats

• Select from a variety of Control Report formats

• Define Inter-Laboratory information to print in a report

Setup

From the Setup screen, select <8> Report Setup to make selections or changes to
report setup specifications.

Report Setup may be viewed at any time.

The Report Print option (enable/disable) may be changed at any time.

The system must be in Standby to edit Patient or Control Report formats or the Inter-
Laboratory information.

Default settings are:

Facility Name:

blank

Facility Address:

blank

ID Number:

blank

Patient Report format:

Lab Report

Control Report format:

Control Chart Report

Содержание UniCel DxC Synchron 600































































































































































































































































































































































































































































































































Результаты поиска

Содержание UniCel DxC Synchron 600

Отзывы:

Бренды по названию

Популярные бренды

Beckman Coulter UniCel DxC Synchron 600, Инструкция по эксплуатации

Результаты поиска

Содержание UniCel DxC Synchron 600

Отзывы:

Бренды по названию

Популярные бренды