LIGHTING SYSTEM
8-17
EAS27260
TROUBLESHOOTING
Any of the following fail to light: headlight, high beam indicator light, taillight, license light or meter
light.
NOTE:
• Before troubleshooting, remove the following part(s):
1 Rider seat
2 Fuel tank
3 Side cowlings
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
1 Check the each bulbs and bulb
sockets condition.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page 8-
88.
Replace the bulb(s) and bulb
socket(s).
2 Check the fuses.
(Main, headlight and park)
Refer to "CHECKING THE FUSES"
on page 8-89.
Replace the fuse(s).
3 Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-89.
• Clean the battery terminals.
• Recharge or replace the battery.
4 Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-85.
Replace the immobilizer unit.
5 Check the dimmer switch.
Refer to "CHECKING THE
SWITCHES" on page 8-85.
The dimmer switch is faulty. Replace
the left handlebar switch.
6 Check the pass switch.
Refer to "CHECKING THE
SWITCHES" on page 8-85.
The pass switch is faulty. Replace the
left handlebar switch.
7 Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-85.
Replace the rear brake light switch.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]
