ELECTRIC STARTER
5-42
7. Check:
• Gear teeth
Damage/wear
→
Replace the starter
motor.
EAS24800
ASSEMBLING THE STARTER MOTOR
1. Install:
• Brush holder
• Armature
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Pull both the brush spring “1” and the brush
“2” outside and hook the brush spring to
the groove portion at the side of the brush.
b. Insert the armature “3” into the brush
holder “4” and push the brush “5” inside
until it touches the armature.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• O-rings
• Rear cover “1”
NOTE:
Align the tab “a” on the brush holder “2” with
the tab “b” in the starter motor rear cover.
3. Install:
• Nut “1”
4. Install:
• Starter motor yoke “1”
• Gasket “2”
• Starter motor rear cover “3”
• Starter motor assembling bolts “4”
NOTE:
Align the match marks “a” on the starter motor
yoke with the match marks “b” on the front and
starter motor rear covers.
New
Nut
5 Nm (0.5 m·kg, 3.6 ft·lb)
Starter motor assembling bolt
5 Nm (0.5 m·kg, 3.6 ft·lb)
New
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]
