manualshive.com logo in svg

Volvo L120E, Operator'S Manual

Share
Download
Volvo L120E Operator'S Manual Download Page 193

 

Cab, specifications L120E

                                                                                                                   

L120 E

 

ردﻮﻟ

 

هﺪﻨﻧار

 

قﺎﺗا

 

تﺎﺼﺨﺸﻣ

190

Cab, specifications L120E

General

The cab is fitted on rubber elements, is insulated and has a flat floor with rubber mat.
Tested  and approved as a protective cab and meets standards according to IS03471-1994 and SAE 1040-APR 88
(ROPS), ISO and 3449-1992 (FOPS) and ISO 6055-1981 (protective roof for rider trucks).

Cab interior fittings and upholstery          Fire retardant (fire resistant) measured according to ISO

3795-1989

Number of emergency exits                     1 (right side window)

Heating and ventilation

The basic version of the loader is provided with a heating and ventilation system with defrosting for all windows and
the best possible air distribution (10 outlets). The cab fan is a double radial fan and it has four speeds. Air
conditioning is available as optional extra.

Operator seat

Height adjustment (rapid adjustment)

100 mm (4 in)

Longitudinal adjustment

160 mm (6.3 in)

Adjustment for driver weight

 40-130 kg (88-287 Ib)

Adjustment of back-rest, (adjustable back-rest incli nation) 

12°  

Upholstery               

               Fire resistant

Lap type seat belt with reel             

Yes

 

Vibration and sound Information

Whole body vibrations

 

NOTE: Whole body vibrations generated by construction machines,  are to a high degree Influenced by
different factors, e.g. working methods, ground conditions and travelling speed selected by the operator.
These factors are independent of the design of the machine. Therefore, it is not possible to state one single
value which is representative of the operator's exposure to whole body vibrations.
The  values  for  whole  body  vibrations stated below. In accordance with European standard EN 474-1, are
not  Intended  to  be  used  to  determine  the operator's exposure to whole body vibrations when using this
machine.

Experience  has  shown that a correct design of the operator seat is the most efficient measure that can be taken to
reduce  the whole body vibrations from a certain family of machines. The Volvo factory-fitted seat meets the criteria
according  to EN ISO 7096:2000, which represent the most severe vibrations arising during real working conditions.
The  seat  in  this machine has been tested applying power density spectrum class EM 3 and it has a transfer factor
of  SEAT  <1.0, which means that whole body vibrations caused by the machine during real working conditions and

when it is used as intended may vary from <0.5 m/s2 to a short-time level of 1.13m/s2.

Sound Information

Sound pressure level (LpA) at operator position    

 See value on decal in the cab

Measuring is carried out according to 98/37/EC
with applicable appendices and measuring method
according to ISO 6396.
Sound power level (LWA) around the machine     

 See value on decal on the machine

Measuring is carried out according to 2000/14/EC
with applicable appendices and measuring method
according to ISO 6395.

Summary of Contents for L120E













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands