Trumpf LASERCELL 1005, Operator'S Manual

Page: 363 / 645

B337EN4_8
Operation
4-203
8.2 Starting production plans
Note:
The production plan is executed without stop. Consequently, all
workpieces which are to be processed need to be loaded before
the start of the production plan.
Select Operation > PRODUCTION > Single job.
Production
plan
Press Production plan.
Or:
Select Activity PRODUCTION >Production plan.
Production
Start/Stop
Press Production Start/Stop.
Production plan starts. The Production plan is executed in
accordance with the sequence from top to bottom. Every NC
program with the status "free" will be processed once. Afterwards,
the status of the NC program switches to "paused".
All of the workpieces must be loaded before the next run-through
can be started. The status of the NC programs to be process needs
to be set with the Status softkey to "free".
After an abort and a renewed start of the production plan, the
processing begins with the first NC program that has the "free"
status.
Prerequisite
•
The machine and laser are ready for operation.
•
The home position of the machine has been established.
•
The production plan must have been created.
•
The status of each sheet job has been defined as "free".
•
All workpieces for a run-through are loaded.