Trumpf LASERCELL 1005, Operator'S Manual

Page: 264 / 645

4-104
Operation
B337EN4_4
Switch elements of the distance control
system
Fig. 39017en
Switch elements for
distance control system
•
Teach probe: press the switch element to work with the teach
probe. The following apply when operating with the teach
probe:
-
The DIAS III distance control system is not active.
-
It is not possible to ignite the laser.
-
It is not possible to open the beam trap.
•
Record DIAS curve: press the switch element to record the
DIAS characteristic curve. The DIAS characteristic curve can
only be recorded if the distance control system is switched on.
•
Distance control system: press the switch to switch the
distance control system on or off.
•
DIAS record: in order to log process data relating to the
distance control system, for servicing purposes: press the
switch element to save the process data from the last 10
seconds onto diskette. To do this, a diskette has to be inserted
in the DIAS computer in the switch cabinet of the machine.
FEED HOLD is triggered during the recording and the drives
are switched off. To cancel FEED HOLD: press MACHINE ON
and then RESET.