Trumpf LASERCELL 1005, Operator'S Manual

Page: 213 / 645

B337EN4_3
Operation
4-53
4.4 PRODUCTION – Switch elements
With switch elements it is possible for the user to perform machine
functions at the press of a button without having to know the
respective NC functions. Only those switch elements can be
actuated which are appropriate for the current operation situation
and can be carried out safely. As a result, there are considerably
fewer switch element options for the operator in "AUTO" submode
than in "JOG" submode. In the PRODUCTION activity, the
switching states of the switch elements to the TLF laser can be
monitored; the execution of the functions is however only possible
in the activity SETUP.
•
Correct rapid feed: The correction switch for the feed rate also
affects the rapid feed rate.
•
Programmed stop: the program execution is stopped at the
block in which the M01 is programmed.
•
Program test: the setpoint display in the axis table "simulates"
the travel motions.
•
Block-by-block: default setting, all NC blocks are processed in
sequence without stops.
•
Single block (each block): select this setting if you want to
stop the program run after each NC block.
•
Single block (functions): select this setting if you wish to stop
the program run after each machine function block.
•
Show all blocks: all NC blocks of the program in the current
block display are shown.
•
Show motion blocks: only the travel blocks of the program will
be displayed in the current block display.