Trumpf LASERCELL 1005, Operator'S Manual

Page: 308 / 645

4-148
Operation
B337EN4_5.DOC
Softkeys:
Find
program
Press the Find program softkey if you want to search for a particular
program. To do this, you need to know the exact program
designation and enter it in the input field.
Select
program
Press the Select program softkey if you wish to select an NC
program in order to execute it.
Save
Teaching
Press the Save Teaching softkey if you wish to save a program
programmed at the teach panel onto the hard drive (MMC) at the
control panel.
Create
sheet job
Press the Create sheet job softkey if you wish to accept the selected
NC program as a sheet job in the production plan sums.
Production
plan
Press the Production plan (sums) softkey to switch to the production
plan sums menu.
Program
all/NCU
Press the Program all/NCU softkey to switch between the two
display types. The program list either contains all of the NC
programs available on the hard drive (MMC) or only the NC
programs which have already been transferred to the NCU.
Program
notes
Press the Program notes softkey to enter notes on a particular
program.
Check
program
Press the Check program softkey to check whether all the table
entries required for executing the program are available.