Trumpf LASERCELL 1005, Operator'S Manual

Page: 417 / 645

5-4
Safety information
B337EN05.DOC
1. Safety information
The following listed setting work may only be carried out by
specially trained service personnel.
Setting work Service
submode
key switch Press
pulse
trigger
switch Required
operating
mode:
Alignment Max.
beam
operating
time Max. beam
power
Alignment ON x x ON 600 s 10%
Alignment OFF
x x OFF 25 s 100%
Setting work
Warning
Invisible, high-energy laser radiation!
Severe skin burns and eye injuries may occur.
½
Setting work which requires 100% laser power may only be
carried out by specially trained service personnel.
½
Protective gloves and laser safety glasses must be worn
during setting work with the laser switched on.
½
If necessary, the customer must take additional precautions
to secure the danger area (e.g. using partition walls of sheet
steel or polycarbonate).
•
The danger class of the laser system in service mode is
class 4.
•
The setting work which the operator is allowed to carry out is
conducted in normal mode of the machine. The danger class
of the laser system in normal mode is class 1.
Table 5-1
Danger class