Trumpf LASERCELL 1005, Operator'S Manual

Page: 497 / 645

5-84
Measuring probe (optional)
B337EN05.DOC
Measurement feature: reference sphere Fig. 31871
1. Position the reference sphere in the working area.
2. Select >Operation >Set-up >MDA.
3. Enter B-120 C0.
4. Press Start.
5. Position the Z axis about 2 mm over the center of the sphere.
6. Select >Operation > Production > Single job.
7. Select and start the CP_TOUCH_PROBE program.
Display dialog opens. The parameters which define the
measuring probe are displayed for information purposes – no
selection or input required.
Measuring probe parameters
8. Press Continue.
Measurement program starts: Three points each on the
circumference of the sphere are approached and measured
successively.
Fig. 38100en