Trumpf LASERCELL 1005, Operator'S Manual

Page: 173 / 645

B337EN4_1
Operation
4-13
Control element Prerequisites Explanation
E-STOP
None Pressing the impact button:
Stops all path movements of the
machine, pallet changer, and any other
available devices.
The cutting gas and/or the cutting gas
supply is interrupted.
Closes the beam trap and switches off
the laser beam.
Immediately cuts off the power supply
of the entire machine (except the 24 V
control voltage).
Aborts an active machining program,
which has to be restarted as
necessary.
OPEN
Electrically driven safety door has been
applied.
E-STOP is not active.
Door is not moving.
The safety door is opened by pressing
the button.
SELECTOR SWITCH is at "1". Only the
left-hand working area is open, the right-
hand one remains closed.
SELECTOR SWITCH is at "2": The
working area is opened completely.
CLOSED
Electrically driven safety door has been
applied.
E-STOP is not active
Door is not moving.
Pressing this button closes the safety
door.
ACKNOWLEDGE
LOADING
NC program is active. Door is closed. Machining is resumed by pressing the
button.
ILLUMINATION
safety cabin
None The illumination in the safety cabin is
switched on and off by pressing the
button.