Trumpf LASERCELL 1005, Operator'S Manual

Page: 552 / 645

6-36
Machine maintenance
B337EN06.doc
5.2 Maintenance on basic machine
Maintenance point no. Interval
operating
hours Maintenance note
Procedure
44
Beam guideway
ventilation filter on
cutting head
Fig. 22971
500 Check and replace
½
If the filter is clearly dirty, replace filter insert.
45
Filter in cutting gas
conduit on cutting
head
Fig. 22971
500 Check and replace
½
If the filter is clearly dirty, replace filter insert.
Note: ensure that the filter insert is installed the right way
round. The arrow must be pointing in the direction of flow.
Z center sleeve connection Fig. 22971
45
44
44 Beam guideway ventilation filter 45 Filter in cutting gas line